A Safe, Energy-Saving and Environmentally Friendly Flow Control Solution Expert

Europe style for Multiple Directional Control Valve - ZDT Model Automatic recirculation control valve – Convista

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for Pressure Reducing Valve For Soot Blowing Reducing Station, Refining and Petrochemical Valve, Double Eccentric Butterfly Valve, We believe that our warm and professional service will bring you pleasant surprises as well as fortune.
Europe style for Multiple Directional Control Valve - ZDT Model Automatic recirculation control valve – Convista Detail:


Profile

ZDT series Automstic recirculation valve is a kind of pump protection device. It automatic protect centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely main flow is zero, the minimum flow can also discharge from the bypass.

ZDT series has big bypass, and this valve is suitable for bypass with big flow, maximum pressure differential is 4MPa, specific choice is determined by factory.


Characteristics

• Simple structure, operation reliable and stable, with few movement parts.
• Be easy for installation, can be installed vertically or horizontally on pump outlet.
• Bypass flow is large, maximum flow is 60% of main flow, KV valve can be adjusted.
• Maximum bypass operating pressure differential is 4MPa. Bypass non-return function is optional.
• Applicable medium including: water, oil, methanol and other liquid medium.
• Working temperature: -196℃ to +130℃.


Diameter and pressure range

Valve body type: three-way casting valve

Nominal diameter: NPS1″-16″ (DN25, 32, 40, 50, 65, 80, 100, 200, 250, 300, 350, 400)

Nominal pressure: CL150#-400# (PN16, 25, 40, 64)

End connection type: Flange FF, RF, RTJ, BW, SW, etc.


Working principle

According to the difference of inductive main flow, main valve disc check cone of automatic recirculation valve will automatically move to a certain position. At the same time the main valve disc drive bypass valve stem, transfer the movement of main valve disc to bypass, through control bypass valve disc position, change bypass throttling area, so as to control bypass flow. When main valve disc back into valve seat closed, all flow backflow through bypass. When main valve disc to rise to top position, bypass is fully closed, all the flow of pump flow to process system. This valve set four functions in one body.

• Flow perception: Automatic recircution valve main valve disc can automatically perceive main flow of process system, thereby according to the flow to determine position of main valve disc and bypass disc.
• Recirculation control: Automatic recirculation valve can inhaled pump normal operation required minimum flow into storage device through bypass, so as to adjust pump H-Q charateristics, to realize recycling.
• Check valve: Automatic recirculation valve also has check valve effect, preventing the liquid backflow to pump body. Bypass non-return function is optional.
• Special bypass size can be customized. The max flow rate of bypass is subject to the max Kv value.


Major parts material

ZDT model automatic recirculation control valve 1

No Name Material No Name Material
1 Body WCB CF8 11 O ring EPDM EPDM
2 Recycle disc 2Cr13 304 12 Stud bolt 45 0Cr18Ni9
3 Recycle seat 2Cr13 304 13 Hex nut 35 0Cr18Ni9
4 Screw gland 2Cr13 304 14 Bonnet WCB CF8
5 O ring EPDM EPDM 15 Guide block 2Cr13 304
6 Main disc 2Cr13+STL 304+STL 16 Bushing 2Cr13 304
7 O ring EPDM EPDM 17 Porous set 2Cr13 304
8 Gasket 2Cr13 304 18 End ring 2Cr13 304
9 Hexage nut 304 304 19 Spring 2 60Si2Mn 1Cr18Ni9Ti
10 Spring 60Si2Mn 1Cr18Ni

Product detail pictures:

Europe style for Multiple Directional Control Valve - ZDT Model Automatic recirculation control valve – Convista detail pictures


Related Product Guide:

Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Europe style for Multiple Directional Control Valve - ZDT Model Automatic recirculation control valve – Convista, The product will supply to all over the world, such as: Oman, Ottawa, Tunisia, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
  • The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
    5 Stars By Judy from Kazakhstan - 2018.11.11 19:52
    The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Gemma from Bulgaria - 2018.12.30 10:21

    Related Products