-
Free sample for Automatic Air Valve - 5315 5316 Thin Check Valve – Convista
Specifications The short face to face dimension and compact design of this Valve allow installation and service in tight spaces. Soft sealed for perfect tightness even at low differential pressure. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B 16.1 Class125. Corrosion Protection Internally and externally Cr plated for carbon steel body and disc. Material Specifications Body SS, carbon steel Cover SS, carbon steel -
Chinese Professional Awwa C500 Nrs Metal Seated Gate Valve - 3648 AWWA C515 NRS Resilient Seated Gate Valve – Convista
Specification Meet or exceed the requirements of AWWA C515 standard. Full waterway. 2″ Square Operating Nut. Rubber fully encapsulated ductile iron wedge. Triple O-Ring stem seal. Flange and drilling comply with ASTM B16.1 Class 125. Mechanical joint outlet complies with ANSI/AWWA C153/A21.53. Working Pressure and Temperature 150psi /200psi for size 2″ to 30″ rated at -10°C to 120 °C. 250psi for size 2″to 18″ rated at -10°C to 120... -
Cheap PriceList for Api 6a Gate Valves - 2122 EN593 Center Line Butterfly Valve – Convista
Specifications Specification Meet or exceed the requirements of EN593. Centerline type. Rubber seat liner bonded on the body. Splined drive. Mounting flange in accordance with ISO 5211. Flange and drilling comply with EN1092 PN10/16. Operated with gear operator. Options BUNA-N bonded body seat. Material Specifications Body ductile iron Seat rubber Shaft stainless steel Disc ductile iron -
Best Price on Brass Valve - 5104A 5105A Silent Check Valve – Convista
Specifications The design is for liquid service and offers many obvious advantages when compared with conventional swing check valve. Spring automatically closes disc at zero flow before flow reversal occurs. This prevents surge and water hammer. Completely guided disc both top and bottom. Perfect tightness soft sealed even at low differential pressure. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B 16.1 Class125. Options PN25/300 psi available. Du... -
Discount wholesale Pe Ball Valve - 035-2302 Wafer Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Replaceable liner for DN300 and below sizes, vulcanized liner for DN350 and above sizes. 2 shafts for DN300 and below sizes and 1 shaft for DN350 and above sizes. Mounting flange in accordance with ISO 5211 or MSS SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options 25bar available, Ductile Iron for 25bar/300psi, DN350 and larger size. SS304/316... -
China Factory for Solenoid Valve 24v - 2302A Wafer Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Light weight design type. Replaceable liner. 2 shafts design. Mounting flange in accordance with ISO 5211 or MSS SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options SS304/316 Stainless steel shaft. GX5CrNiMo19-11-2 (1 .4408) Disc for #2302A. Gear operator or handle operated. Built-in temper switch of gear operator. Material Specificat... -
New Arrival China Plug Valve - Safety Shut-off Valve – Convista
Technical Specifications Nominal Size:DN25～300(NPS1～12) Nominal Pressure：CLass150～900 Design Standard：EN 14382、Q/12WQ 5192 Design Temperature：-29℃～+60℃；-46℃～+60℃ Body Material：WCB、A352 LCC Response Time：≤0.5s (up to operating pressure and valve diameter) Set Deviation:±2.5% Applicable Industries Gas transmission station of long distance pipeline; City gas pressure regulating station; Industrial gas pressure control system etc. Applicable Medium... -
OEM Supply Impulse Safety Valve - Closed spring-loaded low lift type safety valve – Convista
Specifications A41H-16C, A41H-25C, A41H-40C, A41Y-64C, A41Y-100C, KA41H-16P A41Y-16P, A41Y-25P, A41Y- 40P, A41Y-64P, A41Y-100P, KA41Y-25P A41Y-16R, A41Y-25R, A41Y-40R, A41Y-64R, A41Y-100R, KA41Y-40R A41H type are used for the equipment and pipeline of the petroleum gas, air water etc. medium what the working temperature are less than 300°C.A41Y-P/R type are used for the equipment and pipeline of the quality with corrode medium what the working temperature are less than200°C.Ta... -
Wholesale Price Vacuum Pump - Zirconium Pump – Convista
Specifications Performance Scope Flow: Q=5~2500m3/h Head: H≤300m Operating pressure: P=1.6~2.5~5~10Mpa Operating temperature: T=-80~+450℃ Design according to API610 11th standard for horizontal single-stage, single-suction, radial sectioning, Center-line -supported-installation, cantilever centrifugal pump. Remote temperature and vibration sensors installed at the bearing can monitor pump operation remotely. Application: Acetic acid, formic acid, MMA and other industries. -
18 Years Factory Spring Loaded Low Lift Type Safety Valve - Slurry Ball Valve – Convista
Product Information l Type l SB Type l Design Specification l API 6D, ANSI B16.34 l Nominal Diameter l DN25~DN 900 (NPS1″~NPS36″) l Pressure Rating l PN1.6~PN42.0 MPa (Class150~Class2500) l Actuator l Manual Operated, Electrical Actuator, Pneumatic Actuator etc Advantages Slurry BalValve has utilized two patents technologies, for slurry transportation, more consideration has been taken into valve’s flow passage design, mater... -
Special Design for Pvc Butterfly Valve - Spring full bore type safety valve with a radiator – Convista
Specifications A40Y-16C, A40Y-25, A40Y-40, A40Y-64, A40Y-100, A40Y-16, A40Y-25, A40Y- 40P, A40Y-64P, A40Y-100P, A40Y-16, A40Y-25, A40Y-40I, A40Y-64, A40Y-100I A40Y-C type are used for the equipment and pipeline of the air,N2,H2 mined gas etc. medium what the working temperature are less than 400℃.TA40Y-P type are used for the equipment and pipeline of the quality with corrode medium what the working temperature are less than 300℃.Take for extra pressure Protection devices. -
Rapid Delivery for 304 Ball Valve - 3126 DIN3352 NRS Metal Seated Gate Valve – Convista
Specifications Valves comply with DIN3352. Metal seat. Inside screw. Ring stem seal. Handwheel operated. Flanged to EN1902-2 PN10 or PN16. Face to face length in accordance with DI N3202-F4. Options Internally and externally liquid epoxy painted. Material Specifications Body grey cast iron Trim brass Stem stainless steel Bonnet grey cast iron
- Call Support 0086-18515068813
- Email Support sales@convistafc.com