-
New Delivery for Trunnion Mounted Ball Valve - 6123 EN13789, MSS SP-85 Globe Valve – Convista
Specifications Valves comply with EN13789, MSS SP-85. Metal seat. Adjustable stem seal. Packing replaceable under pressure. Available with flanges EN1092-2 PN10 or PN16, ANSI B16.1 Class 125. (Other types available on request) Face to face length in accordance with EN558-1 basic series 10 and ASME B16.10. Options 150 psi available. Material Specifications Body grey cast iron Bonnet grey cast iron Trim bronze Disc bronze Stem stainless steel -
New Arrival China Power Station Gate Valve - 9701 Automatic Air Vent Valve – Convista
Specifications Small orifice of 1/16 in. (1.6mm) to release air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure. NPT or Metric thread of inlet. WRAS approved. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. ... -
Cheapest Factory Orbit Ball Valve - 1205 Metal Seated Plug Valve – Convista
Specifications Valve with very long lifetime, as the seat and plug trim is stainless steel. Low operating torque. Plug designed to streamline type, low friction. Floated seat with good sealed performance. No friction between seat and plug trim when open or close, Plug with sharp edge to cut the branch, soft goods or others, no any impact to close operating. Operated by gearbox. Options 150 psi available. Material Specifications Body ductile ... -
Hot New Products Single Suction Pump - Zirconium Pump – Convista
Specifications Performance Scope Flow: Q=5~2500m3/h Head: H≤300m Operating pressure: P=1.6~2.5~5~10Mpa Operating temperature: T=-80~+450℃ Design according to API610 11th standard for horizontal single-stage, single-suction, radial sectioning, Center-line -supported-installation, cantilever centrifugal pump. Remote temperature and vibration sensors installed at the bearing can monitor pump operation remotely. Application: Acetic acid, formic acid, MMA and other industries. -
OEM/ODM China Carbon Steel Power Station Globe Valve - ZDM Series Automatic recirculation control valve – Convista
Profile ZDM series Automatic recirculation valve is a kind of pump protection device. It automatic protects centrifugal pump when pump body occur cavitation damageor unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic recirculation. Pressure r... -
New Fashion Design for Water Valve - Slurry Ball Valve – Convista
Product Information l Type l SB Type l Design Specification l API 6D, ANSI B16.34 l Nominal Diameter l DN25~DN 900 (NPS1″~NPS36″) l Pressure Rating l PN1.6~PN42.0 MPa (Class150~Class2500) l Actuator l Manual Operated, Electrical Actuator, Pneumatic Actuator etc Advantages Slurry BalValve has utilized two patents technologies, for slurry transportation, more consideration has been taken into valve’s flow passage design, mater... -
China Supplier Cast Iron Valve - Twin spring type safety valve – Convista
Specifications A38Y-16C/25/40, A43H-16C/25/40, A37H-16C/25/40 This safety valves are used for the equipment and pipeline of the steam, water etc. medium what the working temperature are less than 350℃.Take for extra pressure protection devices. Flange connecting dimensions of comply with Standard series one of JB/T ……94. Explanation of materials for main parts A38Y, A43H, A37H safety valve, except the three-ways style (material WCB), the materials of other parts are the same as ... -
OEM Manufacturer Wcb Class1500 Electric Actuator Gate Valve - 3114 AWWA C500 Metal Seated Gate Valve – Convista
Specification Comply with AWWA C500. Adjustable stem seal. Available with handwheel, gearbox or actuator. Flange and drilling comply with ASTM B16.1 Class125. Face to face dimensions in accordance with: EN 558-1 basic series 3, ASME B16.10. Working Pressure and Temperature 150psi/200psi/250PSl rated at -10°C to 120 °C. Working Pressure and Temperature Flange and drilling comply with EN1092-2 PN16. ASTM A276 Grade 304 stem. Stainless steel... -
Wholesale Dealers of Waste Water Valve - 1308 Plunger Valve – Convista
Specifications Precisely control the pressure and flow, the flow characteristics shall be as linear as possible over the whole opening range. Use to prevent from the pressure heads and cavitations. Suit for potable or raw water. Main O-ring seal located on plunger. Four hard faced guides to support cylinder. The system has been proven to minimize wear compared to a three-guide system. Flexible design accommodates many forms of valve actuation and control, such as manual operat... -
Chinese wholesale Double Suction Pump - CDL(F)Vertical Multistage Centrifugal Pump – Convista
Specifications Performance Scope Flow: Q=0.3~110m3/h Head: H≤13~260m Operating temperature: T=0~+120℃ CDL pumps are used to transport clean water or similar liquids, and DLF pumps are used to transport mildly corrosive liquids. It is characterized by small size, light weight, high efficiency, energy saving, low vibration and noise, long service life, small footprint and beautiful appearance. It is used for boiler water supply, high-rise building water supply, hot water circula... -
Factory wholesale Dual Plate Valve - Fully Welded Ball Valve – Convista
Detail Along with the further developing of long distance transmission pipeline, and speedy process on localizing manufacturing pipeline ball valve, the market request a higher requirement on valve’s stable performance, higher strength, longer service life, more widely range of product parameter, which ensure the safety and reliability operation of long distance transmission of pipeline and city fuel gas pipeline. CONVISTA’s forged steel fully welded ball valve with its&... -
Professional Design Closed Spring Loaded Low Lift Type High Pressure Safety Valve - Plugging valve for hydraulic test – Convista
Detail Type Plugging Valve Model SD61H-P3550, SD61H-P3560, SD61H-P38.560, SD61H-P5550(I)V, SD61H-P55140(I)V, SD61H-P55140(I)V, SD61H-P57.550V, SD61H-P6150V, SD61H-P6160V, SD61H-P6377V, SD61H-P6265V, SD61H-P55.5200V, SD61H-P58270V, SD61H-P61308V Nominal Diameter DN 200-1000 It is used as an isolator for hydraulic test on reheater and superheater steam pipes of 25MW to 1,000MW boiler. It can also be used as a section of pipe after installing a guide cylinder. Advantages It ado...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com