-
Hot sale Dsa Single Stage Double Suction Pump - LVP Water Ring Vacuum Pump – Convista
Specifications Performance Scope Max volume: Q=2000m3/h Max vacuum: P=33mbar (not equal to max pressure) Titanium pried vacuum pump unit, by the vacuum pump, water separator, heat exchanger, valves, all kinds of instruments and connecting pipe combination to form a complete set of devices， to achieve the purpose of vacuum dichlorination. LVP type corrosion-resistant liquid ring vacuum pump is used to pump or compress air and other corrosive gas without particles, so a... -
2020 High quality Awwa C504 Center Line Butterfly Valve - 035-2302 Wafer Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Replaceable liner for DN300 and below sizes, vulcanized liner for DN350 and above sizes. 2 shafts for DN300 and below sizes and 1 shaft for DN350 and above sizes. Mounting flange in accordance with ISO 5211 or MSS SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options 25bar available, Ductile Iron for 25bar/300psi, DN350 and larger size. SS304/316... -
100% Original Factory Cryogenic Ball Valve - 3114 AWWA C500 Metal Seated Gate Valve – Convista
Specification Comply with AWWA C500. Adjustable stem seal. Available with handwheel, gearbox or actuator. Flange and drilling comply with ASTM B16.1 Class125. Face to face dimensions in accordance with: EN 558-1 basic series 3, ASME B16.10. Working Pressure and Temperature 150psi/200psi/250PSl rated at -10°C to 120 °C. Working Pressure and Temperature Flange and drilling comply with EN1092-2 PN16. ASTM A276 Grade 304 stem. Stainless steel... -
Wholesale Ceramic Valve - 9709 Double Orifice Air Relief Valve – Convista
Specifications Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Vent the accumulated small volumes of air during normal system operation. NPT or Metric thread of inlet. Working Pressure and Temperature 16bar rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. Material Specifications Bo... -
Hot sale Factory Floating Ball Valve - Plunger valve, Piston type flow control valve – Convista
Product characteristics and benefits • Low actuating torque due to pressure balanced valve piston • Contril valve in straightway type • With customized control device depending on operating conditions • Rotationally symmetrical flow guidance • Annular flow cross section in each position • Axial movement of the plunger by means of crank gear mechanism • With self-locking worm gear unit including position indicator • Elastic profile sealing ring located in the no-flow zone for h... -
Chinese Professional Fire Protection Valve - Side Entry Forged Steel Trunnion Mounted Ball Valve – Convista
Detail Design Standard: API6D Design Configurations: Full port or reduce port, Fire safe certified, Double block&bleed, Emergency sealant injection, Cavity pressure self relief, Blowout-proof stem, Anti-static, Optional double piston design Size Range: 2″~48″ Pressure Rating：ANSI 150lb~2500lb Body Material: Forged Carbon Steel, Stainless Steel Trim Material:A105+ENP,13Cr,F304,F316 Operation: Lever, Gear, Motor, Pneumatic -
18 Years Factory Spring Loaded Low Lift Type Safety Valve - Safety Shut-off Valve – Convista
Technical Specifications Nominal Size:DN25～300(NPS1～12) Nominal Pressure：CLass150～900 Design Standard：EN 14382、Q/12WQ 5192 Design Temperature：-29℃～+60℃；-46℃～+60℃ Body Material：WCB、A352 LCC Response Time：≤0.5s (up to operating pressure and valve diameter) Set Deviation:±2.5% Applicable Industries Gas transmission station of long distance pipeline; City gas pressure regulating station; Industrial gas pressure control system etc. Applicable Medium... -
Factory Promotional Oxygen Ball Valve - ZDL Series Automatic recirculation control valve – Convista
Profile ZDL series Auromatic recirculation valve is a kind of pump prtectiong device. It automatic protects centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic recirculation. Pressure ... -
Massive Selection for Main Safety Valve - 1319 Ductile Iron Pressure Relief Valve – Convista
Specifications Relief valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents inlet pressure from dropping below a predetermined minimum. Operates over a wide flow range. Inlet pressure is adjustable with single screw. Quick opening and adjustable closing speed. Can be maintained without removal from the pipe line. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B16.1 Class125. Groove end complies with AWWA C606 Standard. Corrosion Protection Fus... -
Wholesale Price China Power Station Steam Turbin Safety Valve - 2502A Lug Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Light weight design type. Replaceable liner. 2 shafts design. Mounting flange in accordance IS05211 or Mss SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options SS304/316 stainless steel shaft. GX5CrNiMo 019-11-2 (1.4408) disc for #2502A. Gear operator or handle operated. Built-in temper switch of gear operator. Material Specifications ... -
Quality Inspection for Fully Welded Ball Valve - 2952A Shouldered Ends Center Line Butterfly Valve – Convista
Specifications Meet or exceed the requirements of MSS SP-67. Centerline type. Rubber seat liner bonded on the steel body. Position lock. Handle operated. Shouldered end dimensions comply with AWWA C606. Options WRAS approved fusion bonded coating or liquid painting and rubber seat. EPDM bonded body seat. CF8M Disc. Material Specifications Body carbon steel Seat rubber Shaft stainless steel Disc stainless steel -
Wholesale Dealers of Waste Water Valve - 5306 Grey cast iron Wafer Double Door Check Valve – Convista
Specifications The short face to face dimension and compact design of this valve allow installation and service in tight spaces. Spring assisted for better dynamic behavior. Soft sealed for perfect tightness even at low differential pressure. Available with flanges EN1092-2 PN10 or PN16, ANSIB16.1 Class125 (Other types available on request). WRAS approved: EPDM seated for potable water. Options -10°C to 120 °C for EPDM seat. -10°C to 82 °C for NBR seat. Material Specifications Body ...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com