-
Factory wholesale Pinch Valve - 3114 AWWA C500 Metal Seated Gate Valve – Convista
Specification Comply with AWWA C500. Adjustable stem seal. Available with handwheel, gearbox or actuator. Flange and drilling comply with ASTM B16.1 Class125. Face to face dimensions in accordance with: EN 558-1 basic series 3, ASME B16.10. Working Pressure and Temperature 150psi/200psi/250PSl rated at -10°C to 120 °C. Working Pressure and Temperature Flange and drilling comply with EN1092-2 PN16. ASTM A276 Grade 304 stem. Stainless steel... -
Wholesale High Pressure Gate Valve - Steam extraction check valve – Convista
Detail Type Globe Valve Model J961Y-200, J961Y-P54100（I）V, J961Y-250, J961Y-1500Lb, J961Y-P54140（I）V, J961Y-320, J961Y-P54170V Nominal Diameter DN 65-150 Used for steam, water and other non-corrosive medium pipes of pumping or other systems in a power plant, the product is an indispensable accessory of thermal generator set to protect safe operation of the steam turbine. As a device to prevent reverse flow of medium, the valve can close rapidly and tightly to ... -
Popular Design for Spring Full Bore Type Safety Valve (W Series) - Hydraulic three-way valve for water supply of high-pressure heater – Convista
Detail Type Three-way Valve Model F763Y-2500LB, F763Y-320, F763Y-420 Nominal Diameter DN 350-650 During normal operation of high-pressure heater of 600 to 1,000MW supercritical (ultra-supercritical) thermal power unit, the main route of the three-way valve at high pressure heater inlet is opened and the bypass is closed. Water supply of the boiler enters the high-pressure heater from the main route before entering the boiler through the three-way valve at high pre... -
factory low price Ma Series Sliding-Stem Control Valve - Anti-scouring globe valve – Convista
Detail Type Globe Valve Model J61Y-200, J61Y-250, J61Y-320, J61Y-P54100（I）V, J61Y-P54140（I）V, J61Y-P55190V, J61Y-1500Lb, J61Y-2500Lb, J61Y-420（I）（V）, J61Y-500（I）（V）, J61Y-630（I）（V）, J61Y-4500LB Nominal Diameter DN 10-65 The product is applied mainly to thermal power unit drain and discharge pipeline. Advantages With integrated forging, the valve body features high strength, beautiful modeling and reliable material. Welded connecti... -
Manufacturing Companies for Pressure Limiting Valve - Spring full bore type with lever safety valve – Convista
Specifications A28H-10C, A28Y-10P, A28Y-16P, A28Y-25P, A28Y- 40P A28Y-16C, A28Y-16R, A28Y-25R, A28Y-40R A28H type are used for the equipment and pipeline of the air,N2,H2 mixed gas vapor etc. medium what the working temperature are less than 200℃.A28Y-P/10R8 type are used for the equipment and pipeline of the quality with corrode medium what the working temperature are less than 200℃.Take for extra pressure protection devices. -
Top Suppliers Double Orifice Air Relief Valve - 3924 Grooved Ends NRS Metal Seated Gate Valve – Convista
Specifications Valves Comply with EN1171, MSS SP-70. Inside screw. Adjustable stem seal. Packing replaceable under pressure. Handwheel operated. Groove-Metric or AWWA C606 standard. Face to face dimensions in accordance with EN558-1 basic series 3 and ASME B16.10. Options Metal seat: Bronze or stainless steel. SS304 stainless steel stem. Stainless steel fasteners: SS304. Material Specifications Body ductile iron Bonnet ductile iron Seat... -
Discountable price Wcb Butterfly Valve - 3111 OS&Y Metal Seated Gate Valve – Convista
Specifications Comply with EN1171, BS5150, BS3464 or MSS SP-70. Adjustable stem seal. Flange and drilling comply with EN1092-2 PN16. Face to face dimensions in accordance with EN558-1 basic sories3, series14 or series15, ASME B16.10. GOST Certification. Options Metal seat: Bronze or stainless steel. SS304 stainless steel stem. Flange and drilling comply with ASME B16.1 Class 125. Handwheel operated or gear operate or actuator. Material Specifications ... -
Factory Price For Manual Control Valve - Regulating valve for main water supply bypass – Convista
Detail Type Regulating Valve Model T668Y-4500LB, T668Y-500, T668Y-630 Nominal Diameter DN 300-400 It is used for main water supply bypass pipe of 1,000MW supercritical (ultra-supercritical) unit boiler for regulating water supply flow. Advantages The valve is straight type structure, medium flow direction is flow type and sealing surface of the valve seat is far away from final step flash evaporation zone to guarantee service life. The valve body... -
2020 Latest Design Industrial Valve - 2952A Shouldered Ends Center Line Butterfly Valve – Convista
Specifications Meet or exceed the requirements of MSS SP-67. Centerline type. Rubber seat liner bonded on the steel body. Position lock. Handle operated. Shouldered end dimensions comply with AWWA C606. Options WRAS approved fusion bonded coating or liquid painting and rubber seat. EPDM bonded body seat. CF8M Disc. Material Specifications Body carbon steel Seat rubber Shaft stainless steel Disc stainless steel -
China Factory for Pressure Control Valve - Jacketed Ball Valve – Convista
Product Information Type JB Design Specification ASME B16.34, API 6D, BS5351 NominaDiameter DN50~DN400 (NPS2~NPS16) Pressure Rating PN 1.6~PN10MPa (Class150-Class600) Product Description and Structure Features CONVISTA’s Jacketed Ball Valve with the characteristics of small size, light weight and low fluid resistance, which are recommended to transport the highly solidified or highly viscous material. The outside jacket provide an enough heating... -
OEM China Lift Check Valve - Forged Steel Threaded Socket Welding Gate Valve – Convista
General Model: Z11H/Z11Y Working pressure: PN16-PN160/150LB-900LB Connection type: 1-Screwed Size: 3/8”-2”/DN10-DN50 Design standard: ASME/ANSI B16.34, API602, GB/T12224, GB/T12228, GB/T12234 Thread end dimension: ANSI B1.20.1(NPT), GB/T306-87 Main body material: A105, F5, F11, F22, 304, 304L, 316, 316L, LF2 Inspection and test: API598 or T9092-99 Standard: GB, JB, HB, JIS, JPI, API, ANSI Driving manner: Manual, electric Main dimensions and weight Specs S L ... -
Big discounting Evacuation Valve - 1118 Trip Duty Valve – Convista
Detail Three valves in one: Balancing Valve Check Valve Globe Valve. Spring assisted for better dynamic behavior. Soft sealed for perfect tightness even at low differential pressure. Can be set in conjunction with flow charts. Two test points located on each valve. Available with flange to EN1092-2 pn10 or PN16, ANSI B16.1 Class 125. (Other flange types available on request) Grooved to Metric or AWWA C606 standard. Face to face length in accordance with EN558-1 basic series 1....
- Call Support 0086-18515068813
- Email Support sales@convistafc.com