-
China Cheap price Temperature And Pressure Reducing Valve For Low Pressure Bypass - 1118 Trip Duty Valve – Convista
Detail Three valves in one: Balancing Valve Check Valve Globe Valve. Spring assisted for better dynamic behavior. Soft sealed for perfect tightness even at low differential pressure. Can be set in conjunction with flow charts. Two test points located on each valve. Available with flange to EN1092-2 pn10 or PN16, ANSI B16.1 Class 125. (Other flange types available on request) Grooved to Metric or AWWA C606 standard. Face to face length in accordance with EN558-1 basic series 1.... -
Reasonable price Eccentric Plug Valve - Spring type safety valve – Convista
Detail Type Safety Valve Model A68Y-P54110V, A68Y-P54140V, A68Y-P54200V, A68Y-P5432V, A68Y-P5445V, A68Y-P5464V Nominal Diameter DN 40-150 It is applicable for steam, air and other medium equipment or pipeline (working temperature ≤560℃ and working pressure ≤20MPa) as an overpressure protector. Advantages With spring full-discharge structure design, the valve has large discharge coefficient, simple structure, good sealing performance, accurate open... -
Reasonable price Eccentric Plug Valve - Hydraulic three-way valve for water supply of high-pressure heater – Convista
Detail Type Three-way Valve Model F763Y-2500LB, F763Y-320, F763Y-420 Nominal Diameter DN 350-650 During normal operation of high-pressure heater of 600 to 1,000MW supercritical (ultra-supercritical) thermal power unit, the main route of the three-way valve at high pressure heater inlet is opened and the bypass is closed. Water supply of the boiler enters the high-pressure heater from the main route before entering the boiler through the three-way valve at high pre... -
100% Original Factory Cryogenic Ball Valve - Emergency drain control valve for high pressure heater – Convista
Detail Type Gate Valve Model Z964Y Pressure PN20-50MPa 1500LB-2500LB Nominal Diameter DN 300-500 It is used as opening and closing devices for pumping system or other high and medium pressure pipe systems of 600 to 1,000MW supercritical (ultra-supercritical) unit steam turbine. Advantages The valve body and bonnet adopt middle flange bolted connection structure, featuring convenient disassembly. Both ends adopt welded connection. The valve disc... -
Factory wholesale Dual Plate Valve - 2502 Lug Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593, AS4795.1 and MSS SP-67. Replaceable liner for DN300 and below sizes, Vulcanized liner for DN350 and above size. 2 shafts for DN300 and below sizes and 1 shaft for DN350 and above size. Mounting flange in accordance with ISO 5211 or MSS SP-102. Connection flanged ends: PN10/16, Class 125 and Table D/E. WRAS approved. Options SS304 / 316 stainless steel shaft. GX5CrNiMo19-11-2 (1.4408) disc for #2502. Gear operator or handle operated.... -
Manufactur standard Solenoid Pulse Valve - Water level control valve for water tank – Convista
Detail Type Regulating Valve Model T964Y-420Ⅰ, T964Y-500Ⅰ, T964Y-2500LB Nominal Diameter DN 250-300 It is used for water level regulation of water tank of 600 to 1,000MW supercritical (ultra-supercritical) unit and achieving the purpose of regulating water level of the water tank through different openings. Advantages The valve body adopts overall forged structure with the high strength and the valve adopts plunger type structure with smooth flow... -
Top Suppliers Wafer Check Valve - Spring loaded low lift type with lever safety valve – Convista
Specifications A47H-16C, A47H-25C, A47H-40C A47Y-64C, A47H-64C A47Y-100C, A47H-100C This safety valve is used for the equipment and pipeline of the steam, air etc. medium what the working temperature are less than 350°C.Take for extra pressure protection devices. Flange connecting dimensions of comply with Standard series one of JB/T-94. -
Best-Selling Pvc Ball Valve - MJ Series Spray Water Control Valve – Convista
Technical Parameters Nominal Diameter ：3/4 “~6” Nominal pressure：ANSI 150LB-4500LB Body type straight-through way type, angle type operation temperature 150℃-450℃ Flow characteristics equal percentage, linear Actuator electric or pneumatic actuator Leakage meet ANSI B16. 104 V leakage (VI level seal is available) Valve Characteristics 1)Circulatory convection theory, multi-stage pressure reducing structure. 2)Energy efficiency, ens... -
Wholesale Dealers of Cast Steel Globe Valve - Anti-scouring globe valve – Convista
Detail Type Globe Valve Model J61Y-200, J61Y-250, J61Y-320, J61Y-P54100（I）V, J61Y-P54140（I）V, J61Y-P55190V, J61Y-1500Lb, J61Y-2500Lb, J61Y-420（I）（V）, J61Y-500（I）（V）, J61Y-630（I）（V）, J61Y-4500LB Nominal Diameter DN 10-65 The product is applied mainly to thermal power unit drain and discharge pipeline. Advantages With integrated forging, the valve body features high strength, beautiful modeling and reliable material. Welded connecti... -
Personlized Products High Tmperaure And High Pressure Safety Valve - 5318 Lift Check Valve – Convista
Specifications The design is for liquid service and offers many obvious advantages when compared with conventional swing check valve. Spring automatically closes disc at zero flow before flow reversal occurs. This prevents surge and water hammer. Perfect tightness soft sealed even at low differential pressure. Available with flanges EN1092-2 PN10, PN16 or PN25. Options 16 bar/25bar rated at -10°C to 120°C. Material Specifications Body stainl... -
Reasonable price Eccentric Plug Valve - Forged Steel Self Sealing Globe Valve – Convista
General Model: PJ61, PJ11 Working pressure: 900LB-2500LB Connection type: 6-Socket welding, 1-Thread Size: 3/8”-2”/DN10-DN50 Design standard: ASME/ANSI B16.34, API602 Thread end dimension: ANSI B1.20.1(NPT) Socket welding end size: ANSI B16.11 Main body material: A105, F5, F11, F22, 304, 304L, 316, 316L, LF2 Inspection and test: API598 Standard: GB, JB, HG, JIS, JPI, API, ANSI, ASME Driving manner: Manual Main dimensions and weight Specs S L T W H(Open)≈ Wei... -
PriceList for Cdl(F)Vertical Multistage Centrifugal Pump - HP Heating Jacket Pump – Convista
Specifications Performance Scope Flow: Q=2~2000m3/h Head: H≤200m Operating pressure: P≤5Mpa Operating temperature: T=-80~+200℃ OH2 structure, pump body and pump cover with heat preservation jacket, bearing chamber design with cooling system, often used in the transportation of molten urea, molten ammonium nitrate or other chemical media easy to crystallize. It is used in urea, ammonium nitrate, melamine, compound fertilizer, caprolactam, coal tar smelting, sulfur recovery and ...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com