-
100% Original Factory Cryogenic Ball Valve - M60A vacuum breaking valve – Convista
Specifications Type: nuclear power vacuum breaking valve Model: JNDX100-150P 150Lb Nominal Diameter: DN 100-250 Applied to condenser system of a nuclear power station, it has negative pressure suction, positive pressure exhaust and liquid leakage prevention functions .1.The vacuum breaking valve, an automatic valve, requires no additional drive when it is put into operation. At normal working state, the joint force of spring and medium exerted on valve disc presses the valve d... -
OEM/ODM Supplier Silent Check Valve - Electric three-way valve for water supply of high-pressure heater – Convista
Detail Type Three-way Valve Model F963Y-2500LB, F963Y-420 Nominal Diameter DN 350-600 During normal operation of high-pressure heater of 600 to 1,000MW supercritical (ultra-supercritical) thermal power unit, the main route of the three-way valve at high pressure heater inlet is opened and the bypass is closed. Water supply of the boiler enters the high-pressure heater from the main route before entering the boiler through the three-way valve at high pressure heate... -
Super Lowest Price Out Screw and Yoke Metal Seated Gate Valve - Steam extraction check valve – Convista
Detail Type Globe Valve Model J961Y-200, J961Y-P54100（I）V, J961Y-250, J961Y-1500Lb, J961Y-P54140（I）V, J961Y-320, J961Y-P54170V Nominal Diameter DN 65-150 Used for steam, water and other non-corrosive medium pipes of pumping or other systems in a power plant, the product is an indispensable accessory of thermal generator set to protect safe operation of the steam turbine. As a device to prevent reverse flow of medium, the valve can close rapidly and tightly to ... -
Factory wholesale Shouldered Ends Center Line Butterfly Valve - 2105 EN 593 Double Eccentric Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593. Double eccentric type. Rubber seat ring clamped on the disc. Stainless steel seat welded on the body. Mounting flange in accordance with IS0 5211. Flange and drilling comply with EN1092 PN10/16. Face to face dimension complies with EN558 series 13 or series 14. Working Pressure and Temperature 10bar for size 80 to 2400. 16bar for size 80 to 1200. -10 °C to 120°C for EPDM liner. -10°C to 82°C for BUNA-N liner. Options WRAS approved... -
OEM Supply Wafer Swing Check Valve - Cryogenic Ball Valve – Convista
Product Information Design Specification API 6D, ANSI B16.34 NominaDiameter DN15~DN 800 (NPS1~-NPS32) Pressure Rating PN 1.6~ PN10 MPa (las50-Class600) Shutoff Tightness ISO 5208 Rate A Applicable Temperature -196°C–60°C Actuator Manual operated Electrical Actuator Pneumatic Actuator etc Product Description Applied to low temperature and cryogenic application, such as: LNG, Air Separation, Ethylene Quickly Quenching Cracking Gas, Ethyle... -
Professional China Pull Rod Companding Filter - 7701 Threaded Ends Y-type Strainer – Convista
Detail NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steel with spot welded seam. Recessed seat in body assures accurate screen alignment. NPT or Metric thread ends. Working Pressure and Temperature 25 bar/300 psi rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. Material Specifications Body ca... -
Hot Selling for Directional Control Valve - Spring loaded low lift type safety valve – Convista
Specifications A61H-160C, A61Y-320C A61Y-160P, A61Y-320P A61H/Y- 160, A61H/Y-320 type are used for the equipment and pipeline of the air, ammonia, petroleum gas etc. medium what the working temperature are less than 200℃,A61Y-160P，A61Y-320P type are used for the equipment and pipeline of the quality with corrode gas and liquid medium what the working temperature are less than 200°C. Take for extra pressure protection devices. -
Chinese wholesale Awwa C515 Nrs Resilient Seated Gate Valve - 5301 Wafer Swing Check Valve – Convista
Specifications The short face to face dimension and compact design of this valve allow installation and service in tight spaces. Spring assisted for better dynamic behavior. Soft sealed for perfect tightness even at low differential pressure. Available with flanges EN1092-2 PN10 or PN16, ANSI B16.1 Class125 (Other types available on request). Options Internally and externally liquid epoxy painted or fusion bonded epoxy powder coated (FBE). Material Sp... -
Best quality Pressure Seal Globe Valve - 2105 EN 593 Double Eccentric Butterfly Valve – Convista
Specifications Meet or exceed the requirements of EN593. Double eccentric type. Rubber seat ring clamped on the disc. Stainless steel seat welded on the body. Mounting flange in accordance with IS0 5211. Flange and drilling comply with EN1092 PN10/16. Face to face dimension complies with EN558 series 13 or series 14. Working Pressure and Temperature 10bar for size 80 to 2400. 16bar for size 80 to 1200. -10 °C to 120°C for EPDM liner. -10°C to 82°C for BUNA-N liner. Options WRAS approved... -
Newly Arrival Radiator Valve - 1308 Plunger Valve – Convista
Specifications Precisely control the pressure and flow, the flow characteristics shall be as linear as possible over the whole opening range. Use to prevent from the pressure heads and cavitations. Suit for potable or raw water. Main O-ring seal located on plunger. Four hard faced guides to support cylinder. The system has been proven to minimize wear compared to a three-guide system. Flexible design accommodates many forms of valve actuation and control, such as manual operat... -
OEM/ODM Supplier Flange Type Valve - Dual-lever safety valve – Convista
Specifications GA44H-16C, GA44H-25C, GA44H-40C, GA44H-64C GA44H type safety valve is applicable to the power-station boiler and pressure container (The working temperature is 450°C or less.) which will avoid the pressure rate beyond the allowed upper limit. The medium can be steam or air. Explanation of the materials for main parts For the materials of main parts GA44H lever safety valve is just same as GA42H- 16C/25/40 lever safety valve. -
China Cheap price Mixed-Flow Pump - KHG Vertical Pipe Pump – Convista
Specifications Performance Scope Flow: Q≤600m3/h Head: H≤150m Operating temperature: T≤+240℃ The KHG(OH3) type pipeline pump has an independent bearing chamber and lubrication mechanism, and the force generated by the pump is supported by its own bearing body. It is mainly conveying high temperature, high pressure, particles, corrosive medium, and suitable for petroleum, chemical, energy, metallurgy, textile, paper and other industries.
- Call Support 0086-18515068813
- Email Support sales@convistafc.com