-
CH Standard Chemical Process Pump
Overview CH pump, a horizontal single-stage single-suction cantilever centrifugal pump, is a high-efficiency pump that integrates advantages of a large number of chemical engineering pumps in accordance with the Technical Specifications for Centrifugal Pumps (Class II) GB/T 5656-2008 (equal to ISO5199: 2002). It comprises four models as follows in order to meet the operation requirements: CH model (closed impeller and mechanical sealing) CHO model (semi-open impeller and mecha... -
1318 Pressure Reducing Valve
Specifications Reducing valve: reduces a higher inlet pressure to a lower outlet pressure. Constant outlet pressure over wide flow range. Pilot-operated main valve not subject to pressure fall off. Outlet pressure is adjustable with singe screw. Can be maintained without removal from the pipe line. Adjustable opening / response speed. Stabilized regulation at near-zero flow. Flanged and drilling complies with EN1092-2 PN10/16; ANSIB16.1 Class125. Grooved end complies with AWWA... -
Through Conduit Gate Valve
The through conduit gate valve has two floating seats to provide a tight seal with the gate. Full bore through conduit design can eliminate flow turbulence. Pressure drop is no larger than through an equal length of pipe. -
MJ Series Spray Water Control Valve
Technical Parameters Nominal Diameter ：3/4 “~6” Nominal pressure：ANSI 150LB-4500LB Body type straight-through way type, angle type operation temperature 150℃-450℃ Flow characteristics equal percentage, linear Actuator electric or pneumatic actuator Leakage meet ANSI B16. 104 V leakage (VI level seal is available) Valve Characteristics 1)Circulatory convection theory, multi-stage pressure reducing structure. 2)Energy efficiency, ens... -
Forged Steel Trunnion Mounted Fully Welded Ball Valve
Detail Design Standard: API 6D Design Configurations: Full welding between body and bonnet, Full port or reduce port, Fire safe design, Double block & bleed, Cavity pressure relief, Anti-blowout stem & Anti-static devices, Optional double piston design, Optional underground extended stem design Size Range: 2″~48″ Pressure Rating：ANSI 150lb~2500lb Body Material: Forged Carbon Steel Trim Material:A105+ENP,13Cr,F304,F316 Operation: Lever, Gear, Motor, Pneumatic, -
Side Entry Forged Steel Trunnion Mounted Ball Valve
Detail Design Standard: API6D Design Configurations: Full port or reduce port, Fire safe certified, Double block&bleed, Emergency sealant injection, Cavity pressure self relief, Blowout-proof stem, Anti-static, Optional double piston design Size Range: 2″~48″ Pressure Rating：ANSI 150lb~2500lb Body Material: Forged Carbon Steel, Stainless Steel Trim Material:A105+ENP,13Cr,F304,F316 Operation: Lever, Gear, Motor, Pneumatic -
Axial Flow Regulator
Long-distance pipeline gas or oil station; Pressure regulating station; precision control of pressure and flow rate at the outlet device Applicable Medium：Natural gas, crude and refined oil, other non-corrosive gas and fluid Explosion-proof and Protection class：ExdIIBT4, IP65 -
Axial Pressure Regulating Valve
Long-distance pipeline gas or oil station; Pressure regulating station; precision control of pressure and flow rate at the outlet device Applicable Medium：Natural gas, crude and refined oil, other non-corrosive gas and fluid Explosion-proof and Protection class：ExdIIBT4, IP65 -
Safety Shut-off Valve
Technical Specifications Nominal Size:DN25～300(NPS1～12) Nominal Pressure：CLass150～900 Design Standard：EN 14382、Q/12WQ 5192 Design Temperature：-29℃～+60℃；-46℃～+60℃ Body Material：WCB、A352 LCC Response Time：≤0.5s (up to operating pressure and valve diameter) Set Deviation:±2.5% Applicable Industries Gas transmission station of long distance pipeline; City gas pressure regulating station; Industrial gas pressure control system etc. Applicable Medium... -
MX Series Minimum Flow Circulation Valve
Feature Circulatory convection, multi-stage pressure reducing mechanism, avoide cavitation efficiently, prolong service life. All the trims can be quickly removed and replaced, easy to maintain with less cost. Imported high-quality stem packing ensures leak-free without frequent replacement. Scientific construction, high-performance materials and exquisite workmanship enable both the plug and cage to have excellent anti-blocking and anti-seizure performance so that a small amo... -
Spring full bore type safety valve (W series)
Specifications A48Y-P54 3.82V, A48Y-10, A48Y-10, A48Y-P54 3.82V, A48Y-20, A48Y-P54 5.29V, A48Y-20, A48Y-P54 5.29V, A48Y-20, A48Y-P54 10V, A48Y-20, A48Y-P54 10V A48Y-C type applicable temperature are less than 425ºC; A48Y-V type is suitable for the exceeding pressure protective equipment; their working temperature is 550 ºC or less. Such as the boiler used in PowerStation, pressure trainer, pressure reducing and temperature reducing machine. -
Closed spring loaded full bore type safety valve
Specifications A42Y-16C, A42Y-16P, A42Y-16R, KA42Y-16, DA42Y-16P A42Y-25C, A42Y-25P, A42Y-25R, KA42Y-25P, DA42Y-25P A42Y-40C, A42Y-40P, A42Y-40R, KA42Y-40, DA42Y-40P A42Y-64C, A42Y-64P, A42Y-64R, KA42Y-64, DA42Y-64P A42Y-100C, A42Y-100P, A42Y-100R, KA42Y-100, DA42Y-100P A42Y-C type are used for the equipment and pipeline of the air, petroleum gas, liquid etc. medium what the working temperature are less than 300℃. A42Y-P type and A42Y-R type are used for the equipment and pipe...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com