-
SYGL type handle shake filter
Detail This product used for water supply system and industrial cooling water or boiler water circle, specially under continue operation, if found there is pressure difference feedback from two pressure meter, shake handle many circles, then can exclude pollution when open drain valve, it’s no need dismantle any parts. 1.Working pressure:1.6MPa 2.Medium: water 3.Shell: cast steel 4. Filter screen:304 Size L H 50 240 160 65 270 180 80 300 200 100 350 230 125 3... -
SRBA (SRB) type filter
Product introduction Basked type filter used in pipeline for oil or anther liquid medium, to exclude sundries internal of pipe, the screen area of this filter is 2.5-3.3 times bigger than flow bore area, it’s far exceed Y type and T type filter’s screen area. Filtration precision is the best one among of filters. The screen construction is more advantage than another filters, and convenience for usage. Operating principle Some sundries will brought ... -
7901 Grooved Ends Y-type Strainer
Specifications NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steel with spot welded seam. Recessed seat in body assures accurate screen alignment. Groove dimensions comply with Metric or AWWA C606 standard. Working Pressure and Temperature 16 bar/250 psi rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. ... -
7701 Threaded Ends Y-type Strainer
Detail NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steel with spot welded seam. Recessed seat in body assures accurate screen alignment. NPT or Metric thread ends. Working Pressure and Temperature 25 bar/300 psi rated at -10°C to 120°C. Corrosion Protection Fusion bonded coating or liquid epoxy painted interior and exterior. Material Specifications Body ca... -
7103 Y-type Strainer
Detail BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steel with spot welded seam. Recessed seat in body assures accurate screen alignment. Flanged and drilling complies with EN1092-2 PN16/25. Face to face dimension in accordance with DIN3202 series F1. Working Pressure and Temperature 16 bar rated at -10°C to 120°C for DN50 to DN600. 25 bar rated at -10°C to 120°C for DN50 to DN300. Corrosi... -
7101 Y-type Strainer
Specifications NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs. Screens are perforated 304 stainless steewith spot welded seam. Recessed seat in body assures accurate screen alignment. Flanged and drilling complies with EN1092-2 PN16/25; ANSI B 16.1 Class125. WRAS approved: FIG.7101 DN50-DN600 DI body, EPDM gasket for potable water. Working Pressure and Temperature FIG.7101: 16 bar/200 psi rated at -10°C to 120°C for DN50 to DN600. ... -
GLSY-16 type pull rod companding filter
Detail Product introduction Construction of GLSY- 16 type pull rod companding filter is similar as GL(y) type filter, just add a set of companding joint combination additional, theory of pollution exclude is similar as GL(y) type filter, it’s convenience for installation Exterior dimension sheet DN (mm) 50 65 80 100 125 150 200 250 300 L 300 350 400 450 500 550 650 775 900 H 130 165 195 230 300 335 420 500 580 -
GL(Y)-16 type filter
Product introduction GL(Y) type filter used for water, oil, gas pipeline and kinds of equipment, it mainly excludes sundries internal of pipeline to protect relief valve, pressure release valve, water, valve and pump etc., it’s installed on outlet, normally screen for water usage adopt10~30 holes/c m2, screen for gas usage adopt 40-100 holes/c m2, screen for oil usage adopt 60- -200 holes/cm2. Technical Parameters 1. Working pressure: 1 .6MPa 2.Teat preci... -
T type filter
Operating principle Some sundries will be brought into the pipeline when installation, sundries also have in the raw material while in producing, when liquid flow through filter, all pollution will converge to screen just open cover and cleans screen is ok. Remark: screen area of T type filter is the smallest among of filters, and it’s the most difficult drain filter. Technical Parameters 1. Working pressure: 1.6~4.0MPa 2. Medium: water, natural gas 3. Sh...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com