-
1118 Trip Duty Valve
Detail Three valves in one: Balancing Valve Check Valve Globe Valve. Spring assisted for better dynamic behavior. Soft sealed for perfect tightness even at low differential pressure. Can be set in conjunction with flow charts. Two test points located on each valve. Available with flange to EN1092-2 pn10 or PN16, ANSI B16.1 Class 125. (Other flange types available on request) Grooved to Metric or AWWA C606 standard. Face to face length in accordance with EN558-1 basic series 1.... -
1105 1106 1605 Eccentric Plug Valve
Detail Seat area with welded overlay minimum 90% pure nickel. Shaft sealed by the multiple V-ring type. Round plug fully rubber coated up to 12″, plugs 14″ to 24″ have a cylindrical rubber sealed surface. Bearings of sintered SS316, oil impregnated permanently lubricated. Two test points located on each valve. Flanged and drilling complies with EN1092-2 PN10/16; ANSI B16.1 Class125. Mechanical joint complies with AWWA/ANSI C153. Working Pressure and... -
7109 Suction Diffuser
Specifications Pump protection fitting, Providing in one single compact unit a reducing elbow. A protective strainer and a flow straightener to improve pump performances. Removable 20 mesh start up screen for added protection during system start up. Oversized diffuser screen. Creates a uniform flow to the pump. Angled body pattern also designed for reducing pipe size to the pump. Drain plug for easy routine cleaning. Fully epoxy coated with stainless steel screen for long-las... -
3648 AWWA C515 NRS Resilient Seated Gate Valve
Specification Meet or exceed the requirements of AWWA C515 standard. Full waterway. 2″ Square Operating Nut. Rubber fully encapsulated ductile iron wedge. Triple O-Ring stem seal. Flange and drilling comply with ASTM B16.1 Class 125. Mechanical joint outlet complies with ANSI/AWWA C153/A21.53. Working Pressure and Temperature 150psi /200psi for size 2″ to 30″ rated at -10°C to 120 °C. 250psi for size 2″to 18″ rated at -10°C to 120... -
3248 AWWA C515 NRS Resilient Seated Gate Valve
Detail Specification Meet or exceed the requirements of AWWA C515 standard. Full waterway. 2″ Square Operating Nut. Rubber fully encapsulated ductile iron wedge. Triple O-Ring stem seal. Face to face dimension complies with ASME B16.10 Flange and drilling comply with ASTM B16.1 Class 125. (Other flange types available upon Request) Options ASTM A276 Grade 316 stem. Stainless steel fasteners: A2-70 or A4-70. With post flange. Operated with handwheel, opera... -
3233 AWWA C515 OS&Y Resilient Seated Gate Valve
Detail Meet or exceed the requirements of AWWA C515 standard. Full waterway. Adjustable packing. Rubber fully encapsulated ductile iron wedge. Handwheel-open left or open right. Face to face dimension complies with ASME B16.10 and EN558 series 3. Flange and drilling comply with ASTM B16.1 Class 125 or EN1092-2 PN10/16/25. (Other flange types available upon Request) Grooved ends meet AWWA C606 standard or Metric Dimensions. Options SS316 Stainless steel stem. St... -
3226 AWWA C509 NRS Resilient Seated Gate Valve
Detail Meet or exceed the requirements of AWWA C509 standard. Triple O-Ring stem seal. With two bearings above and below the stem collar to reduce friction. Can be installed in horizontal or vertical position. Face to face dimension complies with ASME B16.10. Flange and drilling comply with ASTM B16.1 Class 125. Working Pressure and Temperature 150psi rated at -10°C to 120°C. Options Available with 200psi/250/psi. ASTM A276 Grade 316 stem. Stain... -
3226 AWWA C509 NRS Resilient Seated Gate Valve
Specification Meet or exceed the requirements of AWWA C509 standard. Full waterway. 2″ Square Operating Nut. Robust design. Bolted bonnet. Triple O-Ring stem seal. Face to face dimension complies with ASME B16.10 and EN 558 series 3. Flange and drilling comply with ASTM B16.1 Class 125. Working Pressure and Temperature 150psi /200psi/250psi for size 2″ to 30″ rated at -10°C to 120°C. 300psi for size 2″ to 12″ rated at -10°C to 120°... -
3114 AWWA C500 Metal Seated Gate Valve
Specification Comply with AWWA C500. Adjustable stem seal. Available with handwheel, gearbox or actuator. Flange and drilling comply with ASTM B16.1 Class125. Face to face dimensions in accordance with: EN 558-1 basic series 3, ASME B16.10. Working Pressure and Temperature 150psi/200psi/250PSl rated at -10°C to 120 °C. Working Pressure and Temperature Flange and drilling comply with EN1092-2 PN16. ASTM A276 Grade 304 stem. Stainless steel...
- Call Support 0086-18515068813
- Email Support sales@convistafc.com